How to Install Samsung SSD 980 Nvme M.2? 8 Steps!

Upgrading to this SSD can greatly enhance your computer’s overall performance and speed up your system’s boot times.

From shutting down your system to securely placing the SSD in the M.2 slot and powering up, we’ll cover each step with clarity.

Dive in, follow the straightforward instructions, and experience the speed and efficiency boost that comes with integrating Samsung’s cutting-edge NVMe M.2 technology into your setup.

Installing Samsung SSD 980 NVMe M.2: Quick Introduction

Tools Needed:

1. Samsung SSD 980 NVMe M.2
2. Screwdriver (if required)
3. Motherboard manual

Step 1: Power Off Your System

Shut down your computer and disconnect it from the power source for safety.

Step 2: Locate M.2 Slot

Refer to your motherboard manual to identify the M.2 slot. It’s usually near the CPU and labeled accordingly.

Step 3: Check Compatibility

Ensure your motherboard supports NVMe M.2 drives. Check the manual or manufacturer’s website for compatibility details.

Step 4: Insert the SSD

Gently insert the Samsung SSD 980 into the M.2 slot at a 30-45 degree angle. Press down until it clicks into place.

Step 5: Secure with Screw (if needed)

Some motherboards may require a screw to secure the SSD. Check your motherboard manual to confirm and use the provided screw.

Step 6: Connective Screw (if applicable)

If your SSD has a thermal pad or heat sink, attach it according to the manufacturer’s instructions.

Step 7: Power On Your System

Reconnect your computer to the power source and power it on. The system should automatically detect the new SSD.

Step 8: Format and Partition (if necessary)

If the SSD isn’t recognized, go to Disk Management (Windows) or Disk Utility (Mac) to format and partition the drive.

You’ve successfully installed your Samsung SSD 980 NVMe M.2. Enjoy the enhanced speed and efficiency of your upgraded storage solution.

Configuring Bios Settings

Configuring BIOS settings is essential for a successful installation of the Samsung SSD 980 NVMe M. 2. Learn how to optimize your computer’s performance and ensure smooth operation with a step-by-step guide.

Accessing The Bios On Your System:

To access the BIOS settings, follow these steps:

• Restart your system and look for the key prompt displayed on your screen. It is usually Esc, F2, F10, or Delete.
• Press the indicated key promptly to enter the BIOS setup utility.

Identifying The M.2 Ssd In The Bios:

Once you have accessed the BIOS setup utility, you need to identify the M. 2 SSD.

Here’s how:

• Locate the “Storage” or “Advanced” tab in the BIOS menu.
• Look for a section labeled “SATA Configuration,” “Storage Configuration,” or similar.
• Check if the M.2 SSD is displayed in the list of available drives. It might be mentioned as “NVMe SSD,” “M.2 SSD,” or something similar.

Adjusting The Boot Order If Necessary:

To ensure proper booting from the SSD, you might need to adjust the boot order.

Here’s what you should do:

• Navigate to the “Boot” tab in the BIOS menu.
• Find the “Boot Order” or “Boot Priority” section.
• If necessary, rearrange the boot order to prioritize the M.2 SSD. Move it to the top of the list using the indicated keys.

Enabling Nvme Support:

To enable NVMe support for your SSD, perform the following steps:

• Locate the “Advanced” or “Advanced Features” tab in the BIOS menu.
• Look for an option related to NVMe configuration or support.
• Enable NVMe support if it is disabled.

By following these steps, you can properly configure the BIOS settings for your Samsung SSD 980 NVMe M. 2. This ensures optimal performance and compatibility with your system, allowing you to make the most of your new SSD.

Transferring Data To The Ssd

Learn how to effortlessly transfer your data to the Samsung SSD 980 NVMe M. 2 for enhanced storage performance. This step-by-step guide simplifies the installation process, ensuring seamless data migration to your new SSD.

Options For Transferring Data From Your Previous Storage Device

If you’re upgrading to a Samsung SSD 980 NVMe M. 2, you’ll want to transfer your data from your old storage device to make sure all your files and settings are preserved.

Using Data Migration Software Provided By Samsung

Samsung provides its own data migration software that makes transferring your data quick and easy.

Follow these steps to use the Samsung Data Migration Software:

• Download and install the Samsung Data Migration Software from the official Samsung website.
• Connect both your old storage device and the Samsung SSD 980 NVMe M.2 to your computer.
• Open the Samsung Data Migration Software and select your old storage device as the source and the Samsung SSD 980 NVMe M.2 as the destination.
• Choose the files and folders you want to transfer or select the option to transfer everything.
• Start the data migration process and wait for it to complete.
• Once the migration is finished, you can remove your old storage device and start using your new Samsung SSD 980 NVMe M.2 with all your data intact.

Manual Data Transfer Methods

If you prefer a more hands-on approach or don’t want to use Samsung’s data migration software, there are several manual data transfer methods you can use:

• External hard drive or USB: Copy your files and folders from your old storage device to an external hard drive or USB drive. Once the transfer is complete, connect the external drive to your computer and copy the files to the Samsung SSD 980 NVMe M.2.
• Cloud storage: Upload your files to a cloud storage service like Dropbox, Google Drive, or Microsoft OneDrive. Once uploaded, download the files to your computer and transfer them to the Samsung SSD 980 NVMe M.2.
• Network transfer: If you have multiple computers connected to the same network, you can transfer files over the network. Share the files or folders from your old storage device and access them from the new Samsung SSD 980 NVMe M.2.
• Reinstalling from scratch: If you prefer a clean install, you can reinstall your operating system and applications on the Samsung SSD 980 NVMe M.2. Make sure to back up your important files and settings before proceeding.

By utilizing either Samsung’s data migration software or manual methods, you can easily transfer your data from your previous storage device to your new Samsung SSD 980 NVMe M. 2.

Optimizing Performance And Troubleshooting Tips

Discover efficient ways to optimize the performance of your Samsung SSD 980 NVMe M. 2 through installation and troubleshooting tips. Boost your system’s speed and address any issues to enhance overall performance.

Installing The Latest Firmware For Your Samsung Ssd 980 Nvme M.2

Follow these steps to install the latest firmware:

• Visit the Samsung website and navigate to the support section.
• Look for the firmware update for your specific SSD model (Samsung SSD 980 NVMe M.2).
• Download the firmware update file to your computer.
• Extract the contents of the downloaded file.
• Locate and run the firmware update executable.
• Follow the on-screen instructions to complete the firmware update process.
• Once the update is finished, restart your computer for the changes to take effect.

Enabling Trim For Enhanced Performance

Follow these steps to enable TRIM:

• Press the Windows key + R to open the Run dialog box.
• Type “cmd” and press Enter to open the Command Prompt.
• In the Command Prompt window, type “fsutil behavior set disabledeletenotify 0” and press Enter.
• Restart your computer for the changes to take effect.

Troubleshooting Common Installation Issues

Although installing the Samsung SSD 980 NVMe M. 2 is a straightforward process, some common installation issues may arise.

Here are some troubleshooting tips to help you overcome these issues:

• Check for compatibility: Ensure that your motherboard supports the M.2 form factor and NVMe protocol. Refer to your motherboard’s manual for compatibility details or visit the manufacturer’s website.
• Secure the SSD properly: Make sure the SSD is securely connected to the M.2 slot and properly screwed in place. Loose connections can cause installation failures.
• Update motherboard BIOS: Check if there are any available BIOS updates for your motherboard. Outdated BIOS versions can lead to compatibility issues with the SSD.
• Use the correct drivers: Download and install the latest drivers for your Samsung SSD 980 NVMe M.2 from the Samsung website. Using outdated or incorrect drivers can cause installation problems.
• Disable Secure Boot: Some systems require disabling Secure Boot in the BIOS settings to ensure the proper functioning of the SSD. Consult your motherboard’s manual for instructions on disabling Secure Boot.
• Check for conflicting software: Antivirus or disk encryption software can sometimes interfere with the installation process. Temporarily disable such programs or add exceptions for the SSD installation.
• Seek professional help: If you have followed all the troubleshooting steps and the installation issues persist, it is recommended to seek assistance from a qualified technician or contact Samsung support for further guidance.

Remember, following these troubleshooting tips can help resolve common installation issues and ensure a smooth and successful installation of your Samsung SSD 980 NVMe M. 2.

Conclusion

Installing the Samsung SSD 980 NVMe M. 2 is a straightforward process that delivers exceptional performance and storage capacity.

By following the step-by-step guide outlined in this blog post, you can easily upgrade your computer’s storage capabilities and enjoy faster boot times, rapid data transfer speeds, and enhanced overall system responsiveness.

The sleek and compact design of the Samsung SSD 980 NVMe M. 2 makes it an ideal choice for both desktop and laptop setups, with its PCIe 3. 0 interface and advanced technology ensuring optimal performance.

Whether you’re a casual user or a professional requiring high-speed storage, this SSD is sure to meet your needs.