How to Factory Reset M.2 Ssd? 10 Steps!

To factory reset M.2 SSD, you need first to back up your data because the reset process will erase everything. Then, turn off your computer and disconnect the power supply.

Open the computer case and locate the M.2 SSD. Once you find it, remove it from the slot. After that, put it back into the slot. Finally, turn on your computer and reinstall your operating system.

A factory reset is a process of erasing all data on a device and returning it to its original manufacturer settings. This process is often used to fix issues that cannot be resolved otherwise or to clean the device before selling it.

In the case of an M.2 SSD, the reset process involves physically removing and reinserting the device and reinstalling the operating system.

Remember, resetting an M.2 SSD is a serious action. It should only be done if there’s a significant issue that cannot be resolved in other ways.

Always make sure to back up any important data before initiating the reset process, as all data will be lost. After the reset, you will need to reinstall your operating system in order to use your computer again.

Step-by-Step Guide: Factory Resetting M.2 SSD

Steps	Procedure
Step 1	Backup your data
Step 2	Turn off your computer or laptop
Step 3	Disconnect any external storage devices and printers
Step 4	Restart your computer or laptop and press the required key (usually F2 or Del) for BIOS setup
Step 5	Navigate to the Boot menu
Step 6	Choose your M.2 SSD from the list of devices
Step 7	Select the option for erasing or wiping the drive. (This option may vary depending on your BIOS)
Step 8	Confirm the action
Step 9	Wait for the process to complete
Step 10	Restart your device

Understanding M.2 Ssds

What Is An M.2 Ssd?

If you are not aware of an m. 2 ssd, it is a solid state drive that is approximately the size of a stick of gum. It is made to fit in thin and small devices like ultra-thin laptops and ultrabooks.

It connects directly to the motherboard and offers faster speeds and higher storage capacities than traditional hard drives.

Key points:

• An m.2 ssd is a small solid state drive, about the size of a stick of gum.
• M.2 ssds are ideal for thin and small devices like ultrabooks and ultra-thin laptops.
• They offer faster speeds and higher storage capacities than traditional hard drives.

What Are The Benefits Of Using An M.2 Ssd?

There are many benefits of using an m. 2 ssd compared to a traditional hard drive.

Here are some of the key benefits:

• Faster boot and load times: An m.2 ssd can achieve faster speeds than traditional hard drives, leading to faster boot and load times.
• Lower power consumption: M.2 ssds consume less power during operation, which leads to better battery life for laptops and other devices.
• No noise: Since m.2 ssds don’t have any moving parts, they make zero noise compared to traditional hdds.
• High durability and reliability: M.2 ssds are more durable and reliable than traditional hard drives. They can withstand more drops and vibrations without affecting their performance.

Why Do You Need To Factory Reset An M.2 Ssd?

There are times when you might need to factory reset your m. 2 ssd.

Here are some of the reasons why:

• Selling or transferring your device: If you are selling or transferring your device, you might want to factory reset your m.2 ssd to erase all personal data and settings.
• Troubleshooting issues: If you are experiencing issues with your device that cannot be solved through other means, you might need to perform a factory reset to fix the problem.
• Improving performance: Sometimes, a factory reset can help improve the performance of your m.2 ssd by removing any unnecessary files, settings or programs.

Key points:

• You might need to factory reset your m.2 ssd if you are selling or transferring your device, troubleshooting issues or improving performance.
• A factory reset erases all personal data and settings, returning it to its default settings.

Preparing Your System For Factory Reset

If you’re planning to reset your m. 2 ssd to its factory settings, it’s essential to prepare your system for the process.

Here are the key steps to follow before initiating the reset.

Backup All Data On The M.2 Ssd

Resetting your m. 2 ssd to factory settings will erase all data stored on the device. It’s crucial to back up all essential files, documents, and media to avoid losing any crucial information.

Here’s how you can back up data on your m. 2 ssd:

• Copy and paste the files you want to backup to an external hard drive or usb flash drive.
• Use cloud storage to save your data by uploading it on google drive or other cloud storage services.

Create A Bootable Usb Drive

Once you’ve backed up all the data from your m. 2 ssd, the next step is to create a bootable usb drive.

Here’s how you can create a bootable usb drive:

• Download the windows 10 media creation tool from the microsoft website.
• Insert a usb flash drive into your computer’s usb port.
• Launch the tool and follow the instructions to create a bootable usb drive.

Disable Secure Boot

Secure boot is a feature in modern computers that prevents unauthorized software from running at boot time. It’s necessary to turn off secure boot before resetting your m. 2 ssd.

Here’s how you can disable secure boot:

• Restart your computer and enter the bios by pressing the f2 or del key.
• Find the secure boot option and turn it off.
• Save the changes and exit the bios.

Disconnect All Other Hard Drives

When resetting your m. 2 ssd, ensure that all other hard drives are disconnected from your computer. This is to avoid accidentally deleting data on other drives.

Unplugging the hard drives is simple, follow these steps:

• Turn off your computer and disconnect the power cable.
• Open the computer case and remove the sata cable from any other hard drives installed in your computer.
• Leave only the m.2 ssd plugged in.

With these steps, your system is ready for the factory reset process. Ensure that you have a stable power source and follow the manufacturer’s instructions for resetting your m. 2 ssd.

Remember to re-enable secure boot and reconnect any disconnected hard drives once the reset is complete.

Performing Factory Reset

M. 2 ssd is an advanced storage technology that provides high-speed performance, but sometimes, you may need to factory reset m. 2 ssd to get it back to its default configurations.

It could be because of several reasons, including getting rid of malware, improving performance, or preparing it for a new installation of the operating system.

We will guide you on how to factory reset m. 2 ssd.

Access The Bios And Boot From The Usb Drive

Before proceeding with the factory reset process, you need to ensure that you have created a bootable usb drive with the operating system you are going to install.

• Restart your computer and access the bios settings by pressing the appropriate key (different for every device).
• Look for the boot options and select the usb drive you have created.
• Save the settings and exit the bios.

Select The M.2 Ssd Drive

After booting from the usb drive, you need to select the m. 2 ssd drive you want to factory reset.

• Open the command prompt window by pressing shift+f10.
• Type “diskpart” and press enter.
• Type “list disk” and press enter.
• Identify the m.2 ssd disk number.
• Type “select disk #” (replace “#” with the disk number you have identified).
• Type “clean” and press enter.

Begin The Factory Reset Process

Once you have selected the m. 2 ssd drive, you can start the factory reset process.

• Type “convert gpt” and press enter.
• Type “create partition primary” and press enter.
• Type “format fs=ntfs quick” and press enter.
• Type “exit” and press enter to close the command prompt window.
• Install the operating system on the freshly formatted m.2 ssd drive.

Reconnect Other Hard Drives And Enable Secure Boot

After the installation is complete, you can reconnect your other hard drives and enable the secure boot feature.

• Open the bios settings.
• Look for the secure boot option and enable it.
• Save the settings and exit the bios.

Performing a factory reset on m. 2 ssd is a simple process that anyone can perform with the right instructions.

By following these easy steps, you can factory reset your m. 2 ssd drive and get it back to its default settings.

Installing The Operating System

Prepare The Operating System Installer

Before installing the os on your device, you need to make sure that you have an operating system installer.

Here’s how you can prepare the operating system installer:

• First, visit the official website of the operating system that you want to install on your m.2 ssd.
• Next, download the operating system’s iso file from the website and save it to a usb flash drive.
• Once you have saved the iso file, create a bootable usb drive using the rufus tool. You can download rufus from their website for free.
• Finally, connect the usb flash drive to your computer to start the installation process.

Boot The System With The Installer

After preparing the installer, you should boot the system with the installer to install the os.

Here’s how you can do it:

• First, switch on your computer and press the key that is necessary to enter the boot menu (usually f2, f8, f12, or delete).
• Once you are in the boot menu, select the usb flash drive that contains the operating system installer.
• Next, save the changes and exit the boot menu to start the installation process.

Select The M.2 Ssd To Install The Os

After booting the system with the installer, you need to select the m. 2 ssd to install the operating system.

Here’s how you can do it:

• First, select the language and other preferences that you want to use for the installation process.
• Next, click on the “install now” button to start the installation process.
• Once you reach the “where do you want to install windows?” Screen, select the m.2 ssd that you want to install the os.
• Finally, click on the “next” button to start the installation process.

Complete The Installation Process

After selecting the m. 2 ssd to install the operating system, you need to complete the installation process.

Here’s how you can do it:

• First, follow the on-screen instructions to complete the installation process.
• Next, enter your product key and other necessary details to activate the operating system.
• Once the installation process is complete, you can start using your computer with the newly installed operating system on your m.2 ssd.

By following these steps carefully, you can factory reset your m. 2 ssd and install a fresh operating system without any problems.

Just make sure to back up your important data before resetting your ssd to avoid any loss of data.

FAQ On Factory Resetting M.2 SSDs

Conclusion

Overall, resetting your m. 2 ssd can be a helpful solution for a variety of issues. Whether you are experiencing sluggish performance, errors, or simply want to start fresh, the factory reset process can get you there.

Remember, though, that resetting your drive will erase all of your data, so it’s important to make sure you have everything backed up beforehand.

Additionally, it’s worth noting that the specifics of the factory reset process may vary depending on your specific ssd model and the software you use.

However, by following these general steps, you should be able to reset your m. 2 ssd with ease. Don’t fear this process—instead, embrace it as a tool to keep your computer running smoothly!